DustPhotonics and MaxLinear demonstrated a silicon photonics chipset with integrated lasers directly driven from a DSP without the use of any external driver chip.
The MaxLinear Keystone DSP (Digital Signal Processor) and DustPhotonics Carmel Silicon Photonics chip were shown together to support direct-drive operation, which reduces the overall cost and power dissipation of optical transceivers for data communication.
Potential applications include 400 Gbps and 800 Gbps pluggable modules and on-board optics.
The DustPhotonics chip includes an integrated DFB (Distributed-feedback) laser and DustPhotonics Low Loss Laser Coupling technology (L3C), achieving a very efficient coupling of light into the Photonic Integrated Circuit (PIC). This unique technology enables the use of 1 laser for every 4 channels.
The MaxLinear Keystone chip is part of a family of DSPs capable of both 400 Gbps and 800 Gbps operation, based on TSMC’s 5nm process. The Keystone DSP provides a rich set of features for transceivers, CPO (Co-Packaged Optics) modules and on-board optics while achieving significantly lower power than competitive solutions. The integrated drivers are optimized for silicon photonics direct-drive and provide the best industry performance for this application.
The companies say their combined solution enables performance that significantly exceeds all IEEE specifications. In terms of power consumption, 400 Gbps transceivers can now be designed to reach sub 7W.
“DustPhotonics is focused on enabling best-in-class Silicon Photonics chips to simplify the efforts of transceiver and systems designers,” said Yoel Chetrit, Vice President R&D of DustPhotonics. “Not only can our Carmel chip simplify the overall system design by reducing the total number of lasers to a single laser for 4 channels, but it also eliminates the external driver, which reduces the cost, power and complexity of the overall system.”
“The combination of our Keystone 5nm integrated driver DSPs with DustPhotonics’ silicon photonics demonstrates the significant power and performance advantages achievable with our integrated drivers,” said Drew Guckenberger, Vice President of Optical Interconnect at MaxLinear. “With double-digit year-on-year growth in market demand for 400Gb/s and 800Gb/s transceivers, this integrated solution can create tremendous value for our customers. We look forward to seeing full transceiver deployments in the near future.”
MaxLinear, MACOM and II-VI eye 800G modules
MaxLinear, MACOM and II-VI, demonstrated 100G/lane multi-mode links targeted for 800G optical modules. These links incorporate the MaxLinear Keystone 5nm 800G DSP, MACOM 100G/lane TIAs and VCSEL drivers and II-VI latest 850nm VCSELs and photodetectors.MaxLinear’s Keystone family of 5nm PAM4 DSPs includes 400G and 800G variants with and without integrated laser drivers. This demonstration uses the 800G DSP, in conjunction with the MACOM four-channel…
MaxLinear showcases 5nm CMOS 800G PAM4 DSP
MaxLinear will showcase a 5nm CMOS 800Gbps PAM4 DSP for data center applications at the virtual Optical Fiber Communication Conference and Exhibition (OFC) from June 6 to June 11, 2021. “With the exponential growth of data traffic within hyperscale cloud networks, the needed increase in interconnect bandwidth in those networks requires lower-power, higher-density optical modules that support higher lane rates,” said Drew Guckenberger, Vice President…
