Keysight Technologies announced a new set of USB 80Gbps test solutions to ensure compliance with the specifications implemented by the USB Implementers Forum (USB-IF) standard.
Highlights:
- D9050USBC USB 80Gbps Transmitter Test (Tx) Software that rapidly and easily tests, debugs, and characterizes complex USB4 designs
- N5991U42A USB 80Gbps Receiver Compliance (Rx) Test Software automates complex stress signal calibration and receiver test procedures to ensure consistency and repeatability
- N7019A USB Type-C Active Link Fixture, which provides access to all Type-C signals via a live link to debug or decode acquired signals
- D9010USBP USB Protocol Trigger and Decode, in conjunction with Keysight’s N7019A USB Type-C Active Link Fixture, offers configurable protocol-level searches and software-based triggering to debug and decode USB low-speed and high-speed traffic
- S96011B enhanced time-domain analysis with TDR and S94USBCB USB Type-C interconnects compliance test applications simplifies and automates the complex test and characterization process of USB Type-C interconnects compliance testing to support the USB4 / USB ecosystem
- PathWave Advanced Design System, PathWave ADS, which includes the W3081E USB4 Version 2.0 IBIS-AMI model maker to facilitate the development of models for 80Gbps USB devices
In accordance with the USB standard and to ensure the interoperability of USB devices, Keysight offers:
- UXR real-time oscilloscope, providing accuracy in waveform representation across a wide frequency range
- Highly integrated Bit Error Ratio Testers (BERTs), which identify errors introduced into the system when data is received – a critical capability in physical layer characterization, validation, and compliance testing
- Vector Network Analyzers, which measure the amplitude and phase responses caused by a device, where the resulting transmission and reflection measurements, impedance, and s-parameters are then used for compliance tests and characterization
John Koeter, Senior Vice President of Marketing and Strategy for the Solutions Group at Synopsys, said: “USB4 is the ubiquitous standard for secure, seamless connectivity of high-definition displays and high-throughput peripherals requiring speeds of up to 80Gbps. Synopsys USB controller, PHY and verification IP solutions leverage Keysight’s design and validation technologies to ensure robustness and compliance of the IP at maximum speeds, enabling designers to quickly deliver interoperable products with less risk.”
The next USB4 spec hits 80 Gbps
The USB Implementers Forum (USB-IF) published the USB4 Version 2.0 specification, a major update to enable USB 80 Gbps performance over the USB Type-C cable and connector. This doubles the maximum aggregate bandwidth of USB to the benefit of higher-performance displays, storage, and USB-based hubs and docks. The USB Type-C and USB Power Delivery (USB PD) specifications have also been updated to support this higher level of data performance.Highlights:Up…
